Corneal Forceps
-
F-1110- working part with 1x2 teeth 0.12 mm high
- 5 mm platform hard-faced with tungsten carbide
- overall length 84 mm
-
F-1713- working part 0,25 mm wide, with groove
- overall leigth 80 mm
-
F-1714- working part 0,25 mm wide as a platform with groove
- overall leigth 80 mm
-
F-1111- working part with 1x2 teeth 0.12 mm high
- 5 mm platform hard-faced with tungsten carbide
- overall length 77 mm
-
F-1211- working part with 1x2 teeth 0.12 mm high
- 5 mm platform hard-faced with tungsten carbide
- flat handle
- overall length 115 mm
F-1212- working part with 1x2 teeth 0.12 mm high
- 5 mm platform hard-faced with tungsten carbide
- round handle
- overall length 110 mm
-
F-1311- working part with 1x2 teeth 0.12 mm high
- 5 mm platform hard-faced with tungsten carbide
- overall length 107 mm
-
F-1410- working part with 1x2 teeth 0.12 mm high
- 5 mm platform hard-faced with tungsten carbide
- overall length 77 mm
F-1411- working part with 1x2 teeth 0.12 mm high
- 5 mm platform hard-faced with tungsten carbide
- overall length 85 mm
-
F-1412- working part with 1x2 teeth 0.12 mm high
- 5 mm platform hard-faced with tungsten carbide
- overall length 110 mm
-
F-1415- working part with 1x2 teeth 0.12 mm high
- 5 mm platform hard-faced with tungsten carbide
- overall length 72 mm
-
F-1416- working part with groove 0,3 mm
- 5 mm platform hard-faced with tungsten carbide
- flat handle
- overall length 84 mm
F-1418- working part with groove 0,3 mm
- 5 mm platform hard-faced with tungsten carbide
- round handle
- overall length 110 mm
-
F-1420- working part with 1x2 teeth 0.12 mm high
- 5 mm platform hard-faced with tungsten carbide
- overall length 94 mm
F-1421- working part with 1x2 teeth 0.12 mm high
- 5 mm platform hard-faced with tungsten carbide
- overall length 72 mm
-
F-1423- working part 0.3 mm wide
- 4 mm platform hard-faced with tungsten carbide
- overall length 75 mm
-
F-1430- working part with 1x2 teeth 0.12 mm high
- 6 mm platform hard-faced with tungsten carbide
- overall length 85 mm
F-1431- working part with 1x2 teeth 0.12 mm high
- 6 mm platform hard-faced with tungsten carbide
- overall length 110 mm
-
F-1510- working part with 1x2 teeth 0.4 mm high
- 5 mm platform hard-faced with tungsten carbide
- overall length 75 mm
-
F-1512- angled working part with 1x2 teeth 0.12 mm high and with groove
- round handle
- overall length 120 mm
-
F-1612- working part with 1x2 teeth 0.12 mm high
- 6 mm platform hard-faced with tungsten carbide
- round handle
- overall length 105 mm
F-1622- working part with 1x2 teeth 0.12 mm high
- 6 mm platform hard-faced with tungsten carbide
- round handle
- overall length 105 mm
F-1632- working part with 1x2 teeth 0.3 mm high
- 6 mm platform hard-faced with tungsten carbide
- round handle
- overall length 105 mm
F-1642- working part with 1x2 teeth 0.5 mm high
- 6 mm platform hard-faced with tungsten carbide
- round handle
- overall length 105 mm
F-1643- working part with 1x2 teeth 0.7 mm high
- 6 mm platform hard-faced with tungsten carbide
- round handle
- overall length 105 mm
-
F-1710- working part with groove 0,3 mm
- 5 mm platform hard-faced with tungsten carbide
- flat handle
- overall length 94 mm
F-1711- working part with groove 0,3 mm
- flat handle
- overall length 72 mm
F-1722- working part with groove 0,3 mm
- 5 mm platform hard-faced with tungsten carbide
- round handle
- overall length 105 mm
-
F-1810- angled working part with 1x2 teeth 0.1 mm high
- flat handle
- overall length 74 mm
-
F-2421- curved U-shaped working part with 1x2 teeth 0.12 mm high
- 1x2 teeth 0.12 mm high
- overall length 100 mm
-
F-2512- curved U-shaped working part with groove
- round handle
- overall length 110 mm